Type: Z-type coupling (right-angle bracket).
Nominal breaking load: 120 kN.
Material: Hot-dip galvanized steel, stainless steel closing pin.
Weight: Approximately 1.16 kg.
Plate width: 24 mm ("24" in the model number corresponds to the value).
Connection hole diameter: 22 mm (standard bolt specification, compatible with M22 bolts).
Dimensions: 100 mm (height) × 24 mm (width) × 22 mm(thickness).
Applications: Right-angle connections of insulator strings and securing cable terminals to frames in 10kV-35kV distribution lines.
The Z-12100 Clevis has a rated load of 121kN and is particularly suitable for large-cross-section conductors. Its four-leg, double-plate construction not only enhances torsional resistance but also reduces stress concentration risks in cornering conditions. Its Ø28mm slotted interface allows for compatibility with international bowl-head brackets, insulator strings, and other hardware.
The Z-12100 Clevis has a rated load of 121kN and is particularly suitable for large-cross-section conductors. Its four-leg, double-plate construction not only enhances torsional resistance but also reduces stress concentration risks in cornering conditions. Its Ø28mm slotted interface allows for compatibility with international bowl-head brackets, insulator strings, and other hardware. Hot-dip galvanized bolts ensure electrical continuity, with a bolt hole tolerance of <=0.1mm. For use at tension tower turning nodes on transmission lines above 500kV, it compensates for line deflection angles of <=35℃. Its galvanizing treatment of >=86μm allows for use in coastal areas with high corrosion.
The Z-12100 Clevis is manufactured from medium-thick steel plate through a stamping and bending process. For high-load applications, ductile iron or cast steel materials are also available to ensure structural strength and durability. In addition, the Z-12100 Clevis features the following performance characteristics:
High-strength load-bearing capacity
Suitable for steel-core aluminum stranded conductors >=400mm², suitable for harsh operating conditions such as heavy icing and strong winds.
Right-angle connection compatible with national standard bowl brackets, insulator strings, and other hardware.
Suitable for long-term outdoor use, passing a 480-hour salt spray test for a long service life.
Different brackets vary in performance and application. The Z-12100 Clevis differs from other brackets in the following key ways:
The Z-12100 bracket is 100mm wide and 120mm long, significantly different from other brackets.
01
Higher than the Z-10 bracket, but lower than the Z-16 bracket.
02
Suitable for 10kV-330kV transmission lines, with distinct application scenarios for different models.
03
The Z-12100 Clevis is a right-angle bracket, appearing rectangular, while the U-shaped bracket is "U." Different shapes also require different connection methods and angles.
04
Regular bracket users may have used more than just the Z-12100 Clevis. So, a question arises: can different brackets be used interchangeably? Different types of brackets have different performance requirements within the power system, so they shouldn't be interchanged randomly, as this would compromise their performance. We need to consider mechanical strength matching, size and connection compatibility, and environmental compatibility. Only when two brackets meet all of these requirements can we consider interchanging them. However, our customer service representative recommends purchasing similar models.
人気ラベル: z-12100 clevis, China z-12100 clevis manufacturers, suppliers, factory
